§ 94-226. Coleman Park multi-family 20 (CP-MF 20) development characteristics and sub-district requirements.

(a)

Intent . The intent of this district is to encourage residential infill that transitions from the higher density of the adjacent CP-MF32 district.   

(b)

Building height. The height of buildings shall not exceed 30 feet.

(c)

Building placement.

(1)

Minimum lot area: 5,000 square feet

(2)

Minimum lot width: 50 feet

(3)

Minimum setbacks for principal buildings:

a.

Front: 25 feet;

b.

Corner: 12.5 feet; ten feet if lot is less than 60 feet wide;

c.

Rear: 15 feet or ten percent of lot depth whichever is less;

d.

Side: five feet minimum, 15 feet total.

(d)

Parking. All parking shall be placed behind the building. One standard parking space shall be provided for each residential dwelling unit.

(e)

Architectural atandards. Structures within this district shall adhere to the design standards established in section 94-222(f).

(f)

Accessory structure. The following structures shall be permitted when accessory to uses permitted by right or when accessory to permitted uses:

(1)

Fences and walls which comply with section 94-302.

(2)

Signs in compliance with section 94-407.

(3)

Swimming pools, tennis courts and similar recreation facilities.

(4)

Accessory garage apartments as permitted in article X of this chapter, provided, however, such apartments shall be permitted only as an accessory use to a single-family dwelling.

(5)

Other accessory structures customarily incidental to uses permitted by right or as special uses permitted in article X of this chapter.

(Ord. No. 4402-12, § 2, 9-18-2012)